Key points:
Flight crew elected to return to Perth after detecting a popping or banging sound from the left engine
Managing partial power loss a more complex scenario than a…
Key points:
Missing nut allowed bolt to separate from bellcrank in cyclic control assembly
Self-locking nut was likely either not reinstalled or inadequately torqued after…
The Australian Transport Safety Bureau is advising owners, operators, pilots and maintainers of piston-engine aircraft to take measures to detect the presence of, and prevent the entry of,…
Key points:
Fatigue crack causes driveshaft failure
Pilot promptly initiated precautionary landing
Manufacturer recommends driveshaft replacement after 5,000 hours
…
Key points:
Helicopter came into a high hover in a crosswind during a hydraulics-off training exercise
Hovering the AS350 without hydraulics can lead to a rapid loss of control…
Key points:
Helicopter’s tail assembly separated in-flight
Cause of the separation is currently unknown
R44 pilots who experience unusual vibrations through the tail rotor…
A freight train unexpectedly encountered and entered floodwaters across a rail bridge near Tully, Queensland, highlighting the importance of weather monitoring stations at known flood…
An incident in which a rail safety worker was nearly struck by two trains within the airport tunnel near the Sydney suburb of Redfern highlights the importance of planning and controlling…
A Diamond DA40 NG light aircraft’s loss of control and collision with terrain just south of Port Macquarie Airport highlights the need to maintain aircraft control in the event of an…
The loss of control and collision with terrain of a Bristell LSA aircraft clearly demonstrates the catastrophic consequences of conducting aerobatic flight in a non-aerobatic aircraft,…