An Australian Transport Safety Bureau (ATSB) investigation has found that a lack of hazard awareness and safety control measures led to the chief engineer on board the Australian bulk carrier River Embley sustaining burns to 45 percent of his body when he was scalded by hot water that unexpectedly sprayed from a steam valve he and a junior engineer were working on. On the morning of 14 October 2005, the engineers were working in the engine room while the ship was at anchor off Gladstone. While they were dismantling the turbo alternator exhaust steam valve a thousand litres of pressurised hot…

The ATSB's on-site investigation into the 5 October 2006 fatal accident involving a BAC-167 Strikemaster jet, NE of Bathurst, NSW, is continuing. Access to the accident site has been hampered by the presence of a large bushfire, which is currently being fought by the NSW Rural Fire Service. The Australian Transport Safety Bureau's on-site investigation team has reported that the aircraft wreckage trail extends more than 1 kilometre. Team members have been able to access some of the aircraft wreckage during a period of limited access to the accident site over the last 2 days. During that time…

An ATSB has found that inadequate load securing methods, combined with reduced track clearances, lead to a collision between a steel plate freight load and a passenger train at Eden Hills station platform on 30 September 2005. The freight load had been protruding from the side of the freight train for at least 85 km before the collision occurred. Eden Hills is located about 14 km south of Adelaide in the Adelaide Hills region. Both trains were heading towards Adelaide when the collision occurred. There were no injuries and only minor damage to track and rollingstock infrastructure. The…

An ATSB investigation report has found that while an emergency passenger evacuation at Hobart was conducted rapidly and in a pro-active manner in the interests of passenger safety, there were problems with communication involving the pilots, ground crew, and cabin crew that created potential risk and has led to improved safety action for the future. The Australian Transport Safety Bureau's final report into the Boeing 717 evacuation on 17 May 2005 found that a right engine starter had failed during the engine start due to loss of lubricating oil because a seal retaining ring was incorrectly…

An ATSB investigation has found that high track temperatures, track stability and the movement of rolling stock led to derailments involving Train 6MP4 at Koolyanobbing WA and Train 6SP5 at Booraan WA on the afternoon of 30 January 2005. Koolyanobbing and Booraan are respectively about 200 kilometres and 360 kilometres west of Kalgoorlie. Both freight trains had been travelling to Perth on the Defined Interstate Rail Network (DIRN), 6MP4 having started its journey in Melbourne and 6SP5 in Sydney. There were no serious injuries due to either derailment but many wagons from each train sustained…

An ATSB discussion paper has found from a large survey of endorsed pilots that a recently introduced type of satellite approach [termed RNAV (GNSS)] used during the May 2005 fatal accident near Lockhart River is perceived as difficult, particularly in bad weather and without automation and vertical guidance instruments. The Australian Transport Safety Bureau sent the survey to all Australian pilots with Area Navigation (RNAV) Global Navigation Satellite System (GNSS) endorsement and received 748 representative responses, a response rate of 22 per cent. The most difficult RNAV (GNSS)…

An Australian Transport Safety Bureau (ATSB) investigation report released today recommends that ship owners, operators and masters with totally enclosed lifeboats on their ships should consider fitting lifting rings with 'hand holds' attached to them, and the provision of foul weather recovery strops. The ATSB report into the accident on board the French Antarctic support vessel L'Astrolabe states that, at about 0355 (local time) on 27 January 2005 a crew member on board the ship either jumped or fell from the ship into the Southern Ocean. In the days before the crew member had been…

An Airbus A340 lost directional control while landing on runway 16 Right at Sydney Airport on 1 November 2000 at 1150 hours ESuT. The aircraft slewed right and came to rest with the nose landing gear resting in soft ground off the runway. The crew had reported problems with the hydraulic system prior to landing. There were no injuries, and an emergency evacuation was not required. A Sydney-based investigator from the Australian Transport Safety Bureau made an initial assessment of the occurrence. He will be joined by other specialist investigators to assist in determining the factors…

ATSB data and analysis released today refutes recent claims reported in the media that the commercial aviation fatal accident rate in Australia is increasing and that the number of aviation fatalities involving professional pilots in Australia over the last three years is very high compared with the years since 1990. Australia still has the best international record in high-capacity regular public transport (RPT) with no hull losses or fatal accidents involving passenger jet aircraft. Even using the broadest definition of commercial aviation to include both RPT and General Aviation except for…

An Australian Transport Safety Bureau study covering 16 years, from 1990 to 2005, has shown a fall in the number of fatal commercial aviation accidents in Australia. The ATSB report Analysis of Fatality Trends involving Civil Aviation Aircraft in Australian Airspace between 1990 and 2005 was released today. Using the broadest definition of commercial aviation to include both regular public transport (RPT) and general aviation except for business/private and sport aviation, the report shows a significant decrease in the number of fatal accidents between 1990 and 2005. There was an increase in…