Jump to Content
During the climb, at about 5,000ft, the crew became aware that the aircraft cabin was not pressurising. Alternate selections were tried without success. The captain then decided to proceed to the destination at FL130 after briefing the cabin crew to be alert for any passenger distress and to administer oxygen from portable bottles if necessary. In accordance with safety requirements, the captain and first officer both donned oxygen masks for the flight above 10,000ft. After reaching cruise level, several passengers and one member of the cabin crew reported headaches and light headedness. The captain descended the aircraft to FL120, and later to 10,000ft when fuel reserves permitted. The flight continued and landed without further incident. None of the affected passengers required medical attention. The aircraft had suffered a pressurisation system failure three days earlier on a flight from Canberra to Sydney. After rectification at Sydney, it flew without incident until this flight. Investigation revealed that the Cabin Outflow Valve and the Equipment Cooling Auto Flow Control Valve were out of adjustment. The Panel Pressurisation Control Mode Selector Switch was also faulty with an intermittent continuity failure. The pilots did not contravene any regulation or company procedure by continuing the flight unpressurised. However, no consideration had been given to any medical problems that any of the passengers may have had, or that could affect their well-being at higher cabin altitudes. Safety Action As a result of the incident, the company has issued instructions that an aircraft that fails to pressurise after take-off and does not respond to early corrective action should return to the departure port or divert to the closest suitable airport.
 
General details
Date: 06 November 1993 Investigation status: Completed 
Time: 11:30 EST Investigation type: Occurrence Investigation 
 Occurrence type:Air/pressurisation 
 Occurrence class: Technical 
Release date: 08 June 1994 Occurrence category: Incident 
Report status: Final  
 
Aircraft details
Aircraft manufacturer: The Boeing Company 
Aircraft model: 737-377 
Aircraft registration: VH-CZP 
Sector: Jet 
Damage to aircraft: Nil 
Departure point:Townsville QLD
Destination:Brisbane QLD
 
 
 
Share this page Provide feedback on this investigation
Last update 24 July 2015