Jump to Content
Download Final Report
[PDF: 375KB]
 
 
Alternate: [DOC: 2.26MB]
 

What happened

At about 0400 (CDT) on Wednesday 11 April an ARTC ballast train 8M24N travelling on the interstate mainline between Broken Hill to Kinalung derailed at the 1118.500 km mark. The derailment was initiated by the 26th wagon as a result of a loading irregularity. The crew of the train was physically unhurt. There was minor damage to the wagon and considerable track damage over a 4 km length.

Safety message 

Uneven loading of ballast wagons increases the potential of derailment. In 2010, the Independent Transport Safety Regulator (ITSR) released a Rail Industry Safety Notification (RISN) No. 32 on the "operation of less than safely loaded wagons". Although the notice refers to coal trains, some of the issues raised in the RISN are also applicable to ballast trains such as ensuring the appropriate wagon loading configurations are in place.

To ensure wagons are evenly loaded, the rail operator's procedures for checking the load distribution need to be followed and carried out to the required standard.

Download Final Report
[PDF: 375KB]
 
 
Alternate: [DOC: 2.26MB]
 
 

General details

Date: 11 Apr 2012 Investigation status: Completed 
Time: 0400 CDT Investigation type: Occurrence Investigation 
Location   (show map):near Broken Hill  
State: NSW  
Release date: 07 Aug 2012 Occurrence category: Incident 
Report status: Final Highest injury level: None 
 

Train details

Train registration: 8M24N 
Type of operation: Ballast train 
Damage to train: Minor 
Departure point:Broken Hill, NSW
Destination:Kinlung, NSW
 
 
 
Share this page Provide feedback on this investigation
Last update 31 August 2012