Aviation safety investigations & reports

Flight path management occurrence involving Boeing 737-838, VH-VYE, 213 km SSE of Brisbane Airport, Qld on 25 February 2013

Investigation number:
Status: Completed
Investigation completed


Download Final report
[Download  PDF: 2.17MB]

What happened

On the evening of 25 February 2013, a Boeing 737-838 aircraft, registered VH-VYE and operated by Qantas Airways Limited, was conducting a scheduled passenger service from Canberra Airport, Australian Capital Territory to Brisbane Airport, Queensland.

At 2110 Eastern Daylight-saving Time, about 115 NM (213 km) from Brisbane, and as the aircraft approached the descent point for Brisbane Airport, the aircraft’s autopilot unexpectedly commenced climbing the aircraft. The crew disconnected the autopilot and descended the aircraft.

During the descent to an air traffic control-cleared level the aircraft rolled left and deviated laterally from the flight plan track. The autopilot was subsequently re-engaged and the aircraft was manoeuvred to re-intercept the flight-planned track. The remainder of the flight was uneventful and the aircraft landed on runway 01 at Brisbane Airport.

What the ATSB found

The ATSB found that the auto-flight system allowed the capture of the Brisbane Airport runway 01 instrument landing system (ILS) glideslope and the aircraft unexpectedly climbed to intercept the signal, which had itself been affected by atmospheric refraction. The preconditions for the occurrence were that the Canberra and Brisbane ILS frequencies were the same, this frequency remained active in the aircraft’s navigation system and, shortly after reaching top of climb out of Canberra, the auto-flight system’s approach mode was inadvertently armed. This meant that when the aircraft was within range of the Brisbane ILS signal, the glideslope would become the active vertical flight mode. The configuration of the auto‑flight system logic on the operator’s Boeing 737 fleet allowed the aircraft to capture and follow a glideslope signal despite not being on the localiser.

The ATSB also found that contrary to the flight crew’s intent, after dis-engaging the autopilot, it was not re-engaged, resulting in a lateral deviation from the planned flight path.

Safety message

This occurrence highlights the human performance limitations with respect to monitoring and detecting mode reversions and flight mode annunciator (FMA) changes in automated aircraft. Flight crew are reminded of the importance of regularly identifying and confirming the flight modes displayed on the FMA.

Download Final report
[Download  PDF: 2.17MB]


To download, click the link, then right-click and select Save As.

Copyright in material obtained from other agencies, private individuals or organisations, belongs to those agencies, individuals or organisations and should be credited accordingly.

General details
Date: 25 February 2013   Investigation status: Completed  
Time: 2110 EST   Investigation level: Systemic - click for an explanation of investigation levels  
Location   (show map): 213 km SSE of Brisbane Airport    
State: Queensland   Occurrence type: Avionics/flight instruments  
Release date: 27 April 2015   Occurrence category: Incident  
Report status: Final   Highest injury level: None  

Aircraft details

Aircraft details
Aircraft manufacturer The Boeing Company  
Aircraft model 737-838  
Aircraft registration VH-VYE  
Serial number 33993  
Operator Qantas  
Type of operation Air Transport High Capacity  
Sector Jet  
Damage to aircraft Nil  
Departure point Canberra, ACT  
Destination Brisbane, QLD  
Last update 03 April 2020