Jump to Content
Download Final Report
[ Download PDF: 3.63MB]
 
 
 

On 22 November 2011, during pre-flight performance calculations at Melbourne Airport, the crew of a Qantas Airways Boeing B737-476 aircraft, registered VH-TJL, inadvertently used the full length runway 16 distance to calculate the take-off performance figures despite planning a runway 16/taxiway Echo intersection departure. Neither crew identified the error, which produced inappropriately high take-off reference speeds. During the take-off run the crew realised there was inaccuracy in the figures and elected to continue the takeoff, rotating the aircraft below the calculated rotation speed (VR). The error was attributed to the Electronic Flight Bag (EFB) menu structure defaulting to the full runway length.

As a result of this incident, Qantas Airlines advised that they have modified the EFB to require a positive selection of the runway length. The application of correct operating data is a foundational and critical element of flight safety, but errors in the calculation, entry and checking of data are not uncommon. The ATSB has published a research report that addresses the issue.

Download Final Report
[ Download PDF: 3.63MB]
 
 
 
 
General details
Date: 22 November 2011 Investigation status: Completed 
Time: 0911 EDT Investigation type: Occurrence Investigation 
Location   (show map):Melbourne Airport Occurrence type:Aircraft preparation 
State: Victoria Occurrence class: Operational 
Release date: 24 May 2012 Occurrence category: Incident 
Report status: Final Highest injury level: None 
 
Aircraft details
Aircraft manufacturer: The Boeing Company 
Aircraft model: 737 
Aircraft registration: VH_TJL 
Serial number: 24437 
Operator: Qantas 
Type of operation: Air Transport High Capacity 
Sector: Jet 
Damage to aircraft: Nil 
Departure point:Melbourne, Vic
Destination:Brisbane, Qld
 
 
 
Share this page Provide feedback on this investigation
Last update 15 November 2016